Benefits of EzyCor
Ornamental Cornice Pty Ltd continually develops the internationally recognized lightweight EzyCor cornice. Builders, architects and handy men worldwide, use this cost effective solution to add style and value at an affordable price. Not only does EzyCor cornice enhance any home, business, high rise building, hotel, restaurant and more, they are so easy to install that you don’t need a tradesmen to help onsite.
Helpful tips when using EzyCor Cornice
Walls should be measured accurately. EzyCor cornice is cut with a mitre box. EzyCor has a degree of resillience which allows mitres to compress and each mitre fits tight and neat every time.
A sharp small tooth saw or knife edge tool is ideal. Power mitre saws are also a handy option.
A good quality water based adhesive with good filling qualities and minimal shrinkage is required. Apply a bead of adhesive to both wall and ceiling edge and mitre ends. Place moulding into position at the correct projection. EzyCor firmly presses into position and no nails are required.
The excess adhesive should squeeze out along the length of the wall and ceiling junction and also mitres and joins. By running a small broad knife or the square end of a small tool along these edges you will neatly remove the excess adhesive, then simply sponge off lightly with clean water.
A good quality water based ceiling paint is recommended, avoid build up of paint along members and mitres. The paint will crack in the drying process if it is applied too thick. As with most internal lining products, spray application is not recommended.